Coated Molybdenum Sputtering Target

The melting point of coated molybdenum sputtering target is 2610℃ and boiling point is 5560 ℃. And the purity of it can up to 99.95%.

Coated molybdenum sputtering target has a lot of advantages such as high melting point, high physical strength, high elasticity modulus, great thermal conductivity and corrosion resistance and so on.

coated molybdenum sputtering target

Molybdenum target is an important sputtering material for thin film deposition technology and the application of it as follow:
1. using in the glasses
The coated molybdenum sputtering target usually use in the camera lens, shortsightedness glass, presbyopic glasses and other corrective spectacles. Coating a very fine film in the surface of glasses can reduce the reflection of light to increase light transmittance which can resists ultraviolet ray. Coating different color the balance of imaging color is also different. On the other hand, coating can delay use-life of glasses.
2. using in the car
Apply coated molybdenum sputtering target in the car beauty for car paint protection is the best because it can avoid oxidation to make car paintwork bright, acid-base resistance, oxidation resistance, ultraviolet ray resistance and other advantages. Because the material of films is inorganic substance is not harm to car. Coating the car will get rid of aging paint and oxide layer which can enhance the hardness of paintwork to avoid scratch and aperture show up and storage time almost 1year.

If you have any other question or inquiry of molybdenum sputtering target, please feel free to contact us through the following methods:
E-mail:sales@chinatungsten.com   sales@xiamentungsten.com
Tel.: +86 592 5129696/86 592 5129595
Fax: +86 592 5129797

More Info:
molybdenum platemolybdenum rodCleaned Molybdenum WireBlack Molybdenum Wire.comMolybdenum SheetMolybdenum Sputtering TargetMolybdenum PinMolybdenum CopperMolybdenum NeedleSpray Molybdenum Wire